8─71
NAV Equipment Setting
1. Set GYRO
0.0°
2. Heading Equipment
GYRO
MAN
0. EXIT
3. Speed Equipment
0.0kts
4. Manual Speed
5. MAG Compass Setting
6. Set/Drift Setting
7. GPS Setting
Manual Speed Setting (Manual Speed)
Procedures 1 Press [RADAR MENU] key twice.
The RADAR Menu will appear.
2 Press [7] key.
NAV Equipment Setting Menu will appear.
3 Press [4] key.
The Code Input menu will appear.
4 Pressing a numeric key, enter the
value and select “ENT.”
The multi-function control is also available for
the entry.
Note: The manually entered speed is effective only when
“MANUAL” is set.
To Next Page
Loading...
