8─85
DGPS Setting
1. Mode
AUTO
0. EXIT
2. Frequency
5. Send Data
275.0KHz
3. Baud Rate (BPS)
50
4. DGPS Mode
ON
Status
No Beacon RCV connection
Frequency --- KHz
Baud Rate --- Baud
RSSI ---
[II] Setting of Working Frequency of Beacon Station (Frequency)
This setting can be made only when Manual is selected in 1. Mode.
Procedures 1 Press [RADAR MENU] key twice.
The Radar Menu will appear.
2 Press [7] key.
NAV Equipment Setting Menu will appear.
3 Press [7] key.
GPS Setting Menu will appear.
4 Press [2] key.
DGPS Setting Menu will appear.
5 Press [2] key.
The Code Input menu will appear.
Enter the working frequency of the Beacon
station.
The multi-function control is also available for
the entry.
6 After having entered the value, press
[5] key to transmit the setting
contents to the DGPS receiver.
Exit 1 Press [RADAR MENU] key.
The Main Menu will reappear.
To Next Page
Loading...
