8─99
8 Press [RADAR MENU] key twice.
The RADAR Menu will appear.
9 Press [8] key.
The RADAR Sub Menu will appear.
10 Press [9] key.
The Test Menu will appear.
11 Press [4] key, and set PM Display to
ON.
The PM bar will appear.
12 Write the value indicated by the PM
bar and the check date to the
INFORMATION LABEL you have
attached to the display unit in step 7.
Test Menu
1. Self Test
2. Monitor Test
3. Panel Test
4. PM Display
ON
5. Error Logging
6. System INFO
0. EXIT
MAGI
PM
To Next Page
Loading...
