JRC JMA-9110-6XA - Canceling Tracked Targets [Acq Cncl]

3.3 Canceling Tracked Targets [ACQ CNCL]
Canceling targets one by one [ACQ CNCL]
Procedures
1 Put the cursor on the tracked target to the desired for canceling target,
and press the [ACQ CNCL] key.
The vectors and symbols of the tracked targets will disappear, and only the radar video remain.
Canceling all targets collectively [ACQ CNCL]
Procedures
1 Press the [ACQ CNCL] key for 5 seconds.
The vectors and symbols of all the targets will disappear, and only the radar video remain.
14