5 TARGET TRACKING / AIS COMMON
OPERATION
5.1 Setting Vectors (Vector)
Setting vector mode [T / R / VECT]
Procedures
1 Press the [T / R / VECT] key.
The current vector mode T (true vector) or R (relative vector) will be displayed in the target
vector display true / relative switching.
Setting vector time on the display (Vector Time)
Procedures
1 Put the cursor on the target vector time setting, and left-click.
The Vector Time value input screen will appear.
2 Enter the value to be set as vector time.
For how to input numeric data on the numeric value input menu, see Section 6.2.
18
To Next Page
Loading...
Need help?
General
