JRC JMA-9110-6XA - 4 Ais Operation; Setting Ais Display Function [Ais; Tt]; Activate Ais Targets (Act Ais); Ai Operation

4 AIS OPERATION
4.1 Setting AIS Display Function [AIS / TT]
Procedures
1 Press the [AIS / TT] key.
The received AIS information will be shown on the radar display.
4.2 Activate AIS Targets (ACT AIS)
Procedures
1 Put the cursor on the sleeping AIS target to be activated, and right-click.
The setting items for cursor modes will be displayed.
15