4－18
JMA-9100/7100 Installation Manual > 4.INITIAL SETTING > 4.11 DATE/TIME DISPLAY SETTING
4.11 DATE/TIME DISPLAY SETTING
To display the time, it is necessary to set the LOCAL TIME, LOCAL DATE and
TIME ZONE.
When the "ZDA" sentence of NMEA0183 is received, Date/Time is displayed
automatically.
Procedures
1) Open the [6.Date Time Setting] screen according to the operation shown
below.
The Date Time Setting menu will appear.
2) Set the information about date and time.
1.UTC/LMT Time display
2.LMT Date
3.LMT Time
4.Time Zone
5.Display Style
Main
→
7. Sub Menu
→
6. Date Time Setting
UTC：
UTC(Coordinate Universal Time)
LMT：
LOCAL(Local Mean Time)
Enter date according to local date.
Enter time according to local time.
Enter the time difference between coordinate universal time and local time.
Set the preferred way the date is to be displayed.
YYYY-MM-DD Example:2007-12-31
MMM DD, YYYY Example:DEC 31, 2007
DD MMM, YYYY Example:31 DEC, 2007
To Next Page
Loading...
Need help?
General
