JRC JMR-7230-S3 - Page 117

6-63 Section 6 Target Tracking and AIS
1
2
3
4
5
6
7
8
9
10
11
12
13
14
15
16
17
18
19
20
21
22
23
24
25
26
27
Note
The maximum number of characters that can be input changes depending on the transmission
method and the message type.
• Sending a message by specifying the MMSI code
- Safety message: Up to 156 characters
- Routine message: Up to 151 characters
• Distributing a broadcast message
- Safety message: Up to 161 characters
- Routine message: Up to 156 characters
6 Click on the [Send] button to send the message.
The message transmission confirmation dialog box appears.
When sending a message by specifying an MMSI code:
When distributing a broadcast message:
7 Click on the [OK] button to send the message.
To cancel the transmission of the message, click on the [Cancel] button.
The following dialog box appears while sending a message.
The transmission of the message currently in progress can be stopped by clicking the [Cancel]
button.