Introduction
Thank you for choosing a JTEX product. Read the user manual
carefully before use, to ensure proper and safe use of the product.
Always follow the instructions to prevent damage or harm.
Our product complies with the following statutory national,
international, and European requirements:
CE Mark:
The CE mark (an acronym for the French
“conformité européenne”) certifies that a product
meets EU health, safety, and environmental
requirements, guaranteeing consumer safety.
Compliant with RoHS:
The Restriction of Hazardous Substances (RoHS)
directive 2015/863/EU is an EU directive to restrict
the use of certain hazardous substances in
electrical and electronic equipment. Each EU
Member State must adopt its law to implement this
directive. If a product is RoHS certified, this confirms
that the proportion of hazardous or difficult-to-
remove substances is limited to the maximum
allowed.
FCC Certificate:
FCC (Federal Communications Commission) is the
government agency that coordinates the activity of
radio waves in broadcasting and communication.
The FCC mark confirms that this device is
compatible with the US market.
PSE Circle Mark:
The PSE Mark is a mandatory safety and EMC
(Electro Magnetic Compatibility) approval for
electrical products sold on the Japanese market.
The applicable law is the DENAN Act (Electrical
Appliance and Material Safety Act) of Japan. The
PSE Circle Mark is the mandatory marking for
Category B products, also called Non-specified
Products. The manufacturer tests the product
To Next Page
Loading...