●
Children may get entangled when playing with a cable (danger
of strangulation). Electric cables are not toys.
Heat & Cooling
● The Jumpstarter may become warm during operation or while
charging. This is normal.
● Do not cover the device while it is in operation or being charged
as this may cause the Jumpstarter to overheat. This poses a risk
of fire, electric shock, or injury.
●
Make sure that the ventilation around the device is good during
charging.
● Keep the device away from heat sources and away from areas
where the ambient temperature is relatively high (e.g. stoves or
other heat sources). Never use the device near naked flames
(such as burning candles) or on hot surfaces.
● The Jumpstarter is designed to work best in normal ambient
temperatures between 0°C and 35°C and to be stored at
temperatures between 0°C and 45°C. The Jumpstarter may be
damaged and the battery life may be shortened if the device is
stored or used outside this temperature range. Do not subject
your device to dramatic changes in temperature. Do not store
your device in a hot car or direct sunlight for extended periods.
Do not place the device near a window (especially in the
summer).
Water
WARNING: This device is not waterproof.
●
Never use the Jumpstarter with damp or wet hands. Moisture
can cause electric shock or short circuits.
● Do not use the Jumpstarter in or near a bath, shower, swimming
pool, or any container filled with water, such as a sink.
●
Do not charge in wet or damp environments (such as the
bathroom).
● Do not use in wet environments and do not immerse in liquid.
Never pour liquids over or near the Jumpstarter. There is a risk
of electric shock/short circuit! If liquid does get into the housing
unplug it immediately and then turn off the Jumpstarter.
To Next Page
Loading...