7. Low voltage limits
8. High voltage limits
Instructions for Emergency
Start/Overstart
Preparation.
- Make sure that the Jumpstarter has
more than 30% power. When less
than 30% do not use it to jump-
start a vehicle.
- Do not connect the device to a
vehicle battery with a voltage >
12V.
- Remove the vehicle key from the
ignition.
Connect the Jumpstarter.
Connect the black jumper cable
connector to the Jumpstarter, making
sure the connector is fully seated in
the Jumpstarter. The connector's LED
flashes red and green when the
connection is successful.
To Next Page
Loading...