instruction concerning the use of the device by a person
responsible for their safety.
● Never use the device if you feel sleepy or if you have taken
substances that shorten your reaction time (such as painkillers
or alcohol).
● Be permanently alert. Pay attention to what you are doing.
Proceed wisely. Do not use the Jumpstarter if you are not
focused.
Electronics & USB Adapter
●
You may not reconstruct, self-repair, or disassemble the
Jumpstarter. This can damage the device.
●
Maintenance, modifications, and repairs may only be carried
out by the manufacturer, a professional workshop appointed by
the manufacturer, or a similarly qualified person.
● Check the device from time to time for damage. Never use the
device if it shows signs of damage.
●
The Jumpstarter cannot be used as a charger for a vehicle
battery.
● Do not jumpstart a vehicle while charging the Jumpstarter.
●
Do not charge the Jumpstarter immediately after use or while it
is still hot. Let it cool down first.
● Only use a USB adapter 5V / 2A output (not included in the
package) to charge the Jumpstarter. Another adapter with the
wrong specifications may cause malfunction and/or damage.
Charging with a power bank or using a USB port of a laptop/
computer is allowed, but not recommended.
●
To prevent damage to the adapter and/or the Jumpstarter,
make sure your power mains socket supplies the correct power
supply for the USB adapter.
●
The mains socket must be located near the device and easily
accessible.
● To avoid energy loss and possible safety risks, always remove
the USB adapter from the mains socket when the battery is not
being charged and before cleaning.
● Never force the plug of your USB adapter into a mains socket; if
it does not fit easily into the mains socket, stop using it. Always
make sure that the plug of your USB adapter is properly
connected to the mains socket.
● It is normal for the USB adapter to feel a little warm; however, a
loose fit between the mains socket and the plug of the USB
To Next Page
Loading...