Cleaning
● Allow the device to cool down completely before cleaning.
●
Put the power off before cleaning. Never clean while charging
the battery.
● A soft dry cloth is recommended for cleaning the exterior of the
Jumpstarter.
● Be careful not to put too much pressure on the display and the
buttons of the device while cleaning.
● Do not immerse the Jumpstarter in water or any other liquids. It
is not allowed to rinse the device with water, to prevent the
water from leaking into the electrical circuit and causing
malfunctions.
●
Under no circumstances use aggressive cleanings agent,
cleaning alcohol, or other chemical solutions since these can
penetrate the housing or impair functionality.
● Do not use abrasive objects for cleaning.
● Cleaning must not be performed by children.
Maintenance & Service
● Apart from occasional cleaning, the Jumpstarter is
maintenance-free.
●
You may not reconstruct, self-repair, or disassemble the
Jumpstarter.
● Check regularly for damage and severe wear.
WARNINGS:
- Do not attempt to open the Jumpstarter for
maintenance. Removing the housing or improper
reassembly may cause electric shocks, damage, short
circuit, or fire.
- If for any reason you open the housing, the warranty will
become null and void. The Jumpstarter contains no user-
serviceable parts.
- Maintenance, service, and repairs may only be carried
out by the manufacturer, a professional workshop
appointed by the manufacturer, or a similarly qualified
person. To obtain maintenance or service, contact us
To Next Page
Loading...