EasyManua.ls Logo

JTEX PRO-009 - Page 51

JTEX PRO-009
Print Icon
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
-
50
-
Disconnect the air hose.
Wait until the pumping has stopped
and disconnect the air hose.
WARNING:
- To avoid overinflating the tires, it is advisable to consult
the tire pressure values in the car manual before inflating
the tires or consult the tire markings on your bike.
- Do not kink or block the air hose while the compressor is
running. Keep the air hose as straight as possible.
- The compressor is designed for occasional use.
Prolonged use leads to overheating of the product and
may cause damage. Cooling for 5 minutes after inflating
a tire is recommended.
- If you find abnormal noises or excessive temperature
during inflation, stop using the compressor immediately.
Let the appliance cool down for at least 15 minutes.
- The air hose may be hot after use. Be careful with your
hands when removing the air hose.
- The connector between the air hose and the connection
to the compressor may become hot during prolonged
use. Always wait a few minutes before touching the
connector.
Step

Table of Contents