JTS Mh-950 - Important Caution; Features; Specification; 3-1 Receiver;; US-901 D US-9001 D

WIRELESS MICROPHONE SYSTEM
1
2
1. Important Caution
2. Features
Always make all connections before plugging the unit into an AC power outlet. •
Do not leave the devices in a place neither with high temperature nor high humidity.•
Always do not handle the power cord with wet hands !•
Keep the devices away from re and heat sources. •
Operated in UHF band where there is less RF interference than the VHF band. •
Due to the PLL synthesized technology, the system can oer up to 193 selectable frequencies for •
choosing simultaneously.
e true diversity reception with 2 independent RF receivers ensure the stable transmission and •
reception.
Adjustable Pilot tone squelch control can eectively reduce the noise. •
Equipped with S.A.W. lter benets the interference-resistant. •
Tuned antennas can benet the stable RF reception.•
Built-in Noise Squelch circuity & Mute function are available to restrain the interference for •
signals.
Compact half-rack receiver design is considerable for the space saving.
•
Rugged metal housing can pass through the dicult environment. •
Equipped with balanced XLR and unbalanced output allow great convenience.•
Anti-interference design is available to work with every computer device.•
3. Specication
3-1 Receiver // US-901D US-9001D
Frequency Preparation......
Carrier Frequency Range
S/N Ratio...................................
T.H.D..................................
Display..............................
Display Contents...................
Controls............................
Audio Output Level............
AF Output Impedance......
Squelch.............................
Operation Voltage.................
Output Connector................
Dimension(m/m)...............
PLL Synthesized Control
502~960 MHz
> 105dB
<0.6%@1KHz
LCD
Frequency, Antenna A/B, Mute Display, RF/AF Level Meter,
Baery Fuel Gauge
Power On/O, Frequency Up/Down, Frequency
Scan, Audio Level, Lock-on
-12dB
600Ω
Pilot Tone & Noise Mute
12-18 VDC, 200 mA
1 XLR Balanced Socket
1 Ø6.3mm Unbalanced phone jack
US-901D: 212mm (W)* 40mm (H)* 125mm (D)
US-9001D: 212mm (W)* 40mm (H)* 137mm (D)