JTS SIEM-2T User Manual

9
10
3. Power connection.
Connect one end of AC/DC adaptor cable to DC input
socket in the rear panel of the receiver, and plug another
end into an AC outlet.
5-2 SIEM-2R
1. Insert and replace batteries
(1) Slide the lid of battery tray. (Figure 1)
(2) Uncover the lid and insert two pieces of 1.5V
AA batteries according to the polarity indication.
(Figure 2)
(3) Cover back the lid.(Figure 3)
DC INPUT
DC POWER SOCKET
XLR/ɑ6.3mm COMBO INPUT
Figure 1
Figure 3
Figure 2
POWER
SIEM-2T
Transmitter
AC/DC ADAPTOR
AC POWER SOCKET
(Figure B)
Figure A
Figure B
1856

JTS SIEM-2T Specifications

General

Brand	JTS
Model	SIEM-2T
Category	Microphone system
Language	English