3. Installing and adjusting
the
pedal
Motor
regulating
lever
ft
1)
How
to
attach
the
connecting
bar
After
the
motor
regulating lever
and
the
pedal were
connected
by
means
of
the
connecting
bar, adjust
the
vertical position
of the connecting bar by sliding the con
necting bar positioner.
Connecting
bar
posj
tloner
2) How to adjust the pedal angle
You can adjust the pedal angle by chang
ing the effective length of the connecting
bar. Loosen the clamp screw and change
the effective length of the connecting bar.
- 2 -
To Next Page
Loading...
