What to do if my JUKI HZL-70 doesn't operate?
If your JUKI Sewing Machine doesn't operate: * Ensure the machine is turned on. * Check that the machine is plugged in and connected to the electric outlet. * Lower the presser foot lifter if it is raised. * Return the bobbin winder spindle to the left position.
What to do if my JUKI Sewing Machine jams?
If your JUKI Sewing Machine jams, remove the upper thread and bobbin case, turn the handwheel backwards and forwards by hand, and remove the thread remnants that are caught in the hook.
General| Type | Electronic Sewing Machine |
|---|---|
| Maximum Stitch Width | 7mm |
| Maximum Stitch Length | 5mm |
| Needle Threading System | Automatic |
| Display | LCD |
| Weight | 7 kg |
| Foot Control | Included |
Description of how to attach and use the snap-in sewing table.
List of standard and optional accessories included with the machine.
Explanation of the two-stage lift for the presser foot.
Instructions on how to adjust the feed dog lever.
Operation and status indication of the start/stop button.
Function of the reverse stitch button.
How the auto-lock and stop functions work.
Control of needle position when stopping sewing.
Adjusting the sewing speed using the lever.
How to cycle through pattern, width, and length modes.
Adjusting stitch length for selected patterns.
Adjusting stitch width for selected patterns.
Using buttons for quick selection of utility patterns.
Technique for turning corners accurately while sewing.
How to use the reverse button to secure seams.
Using the free arm for sewing tubular areas.
Method for sewing thick or multiple layers of fabric.
Procedure for cutting threads after sewing.
Changing needle position for straight stitches.
Adjusting width and length for zigzag stitches.
How to use the overcasting foot for edge finishing.
Overcasting edges using the standard presser foot.
Step-by-step guide for sewing a centered zipper.
Method for sewing with a single cord.
Method for sewing with three cords.
Creating a scalloped edge on fabric hems.
Stitching a decorative scallop pattern.
Free motion technique for repairing holes or tears.
Meaning of different beep signals.
Action required when bobbin is full or spindle is in wrong position.
Interpreting error messages and troubleshooting.
Instructions for cleaning the machine's front panel.
Procedure for cleaning the exterior of the sewing machine.
To Next Page
