JUKI IP-110 Type F - 13. THREAD TRIMMING PROHIBITION SWITCH

- 21 -
13. THREAD TRIMMING PROHIBITION SWITCH
• When thread trimming prohibition switch
1
is pressed, ON/OFF of the
thread trimming prohibition is changed over.
• This switch is used to temporarily make the thread trimming function
inoperative.
The other performance of sewing machine is not affected by this switch.
(If the automatic reverse stitching (for end) is specified, the sewing
machine will perform the automatic reverse stitching at the end of sewing.)
• If the automatic thread trimming switch and the thread trimming
prohibition switch are both specied, the machine will not perform
thread trimming but stop with its needle up.
1