- 34 -
■
Warning screen
Warning screen is displayed when the warning time is reached.
2
1
■
Sewing management function screen
2) Press
2
to display the maintenance function screen.
(For other functions, refer to the Engineer’s Manual.)
1
: When
1
is pressed, the screen can be cleared. However, the counter itself cannot be cleared. In case
of the replacement of needle, the warning screen is displayed at intervals of 10 minutes until clearing
is performed. In case of other warnings, the warning screen is displayed at the time of turning ON the
power until the counter is cleared.
2
: When
2
is pressed, the screen is cleared and the counter value is cleared as well. From this time,
counting starts newly.
[Setting of the warning setting time]
■
Infomation screen
1) Press switch
1
for approximately three seconds in the information screen.
1
2
To Next Page
Loading...
Need help?
General
