JUKI MS-1261M - 11. ADJUSTING THE NEEDLE GUARD; Needle Guard Clearance Adjustment; Vertical Position of Needle Guard; Needle and Looper Clearance Adjustment

– 6 –
ENGLISH
WARNING :
To protect against possible personal injury due to abrupt start of the machine, be sure to start the following
work after turning the power off and ascertaining that the motor is at rest.
11. ADJUSTING THE NEEDLE GUARD
(
0.05 to 0.1 mm for MS-1261M
)
0.1 to 0.2 mm
0.1 to 0.2mm
(MS-1261)
0.05 to 0.1mm
(MS-1261M)
WARNING :
To protect against possible personal injury due to abrupt start of the machine, be sure to start the following
work after turning the power off and ascertaining that the motor is at rest.
12. ADJUSTING THE LOOPER LHREAD CAM