JUKI MS-1261M - 18. TABLE OF REPLACEABLE GAUGES; MS-1261 Replaceable Gauges; MS-1261 Feed Dog Spacer Table; MS-1261 M Replaceable Gauges

– 9 –
18. TABLE OF REPLACEABLE GAUGES
12345
Part name
Gauge set
(with fi nger guard)
Throat plate Needle clamp (asm.)
Presser foot (asm.)
(with fi nger guard)
Feed dog (asm.)
Needle gauge
Code inch mm
E 7/32 5.6 12954061 12954004 12956355 12957163 12965158
F 1/4 6.4 12953964 12953907 12956256 12957064 12965059
G 9/32 7.2 12954160 12954103 12956454 12957262 12965257
H 5/16 8.0 12954269 12954202 12956553 12957361 12965356
K 3/8 9.5 12954368 12954301 12956652 12957460 12965455
678
Part name Looper (L) (asm.) Looper (R) (asm.) Looper (C) (asm.)
Needle gauge
Code inch mm
Mark
No.
Mark
No.
Mark
No.
E 7/32 5.6
12968558 1 12968855 1
12969150 1
F 1/4 6.4
G 9/32 7.2
H 5/16 8.0
12968657 2 12968954 2
K 3/8 9.5
(1) MS-1261 (for extra-heavy-weight materials)
(2) MS-1261M (for medium-weight materials)
12345
Part name
Gauge set
(with fi nger guard)
Throat plate Needle clamp (asm.)
Presser foot (asm.)
(with fi nger guard)
Feed dog (asm.)
Needle gauge
Code inch mm
E 7/32 5.6 12954665 12954608 12956355 12956165 12970059
F 1/4 6.4 12954566 12954509 12956256 12956066 12969952
G 9/32 7.2 12954764 12954707 12956454 12956769 12970158
H 5/16 8.0 12954863 12954806 12956553 12956868 12970257
K 3/8 9.5 12954962 12954905 12956652 12956967 12970356
MarkMark Mark
9. Spacer for feed dog (for MS-1261)
No.
Plate thickness
(mm)
Part No. Part name
①
0.3 12976601 Feed dog adjusting plate B
②
0.8 12976700 Feed dog adjusting plate C
③
1.0 12976809 Feed dog adjusting plate D
* A spacer is not included in the gauge set.