JUKI MS-1261M - 13. HEIGHT OF THE FEED DOG; Feed Dog Height Adjustment; 14. TIMING TO RELEASE THE NEEDLE THREAD TENSION; Needle Thread Tension Release Timing

– 7 –
WARNING :
To protect against possible personal injury due to abrupt start of the machine, be sure to start the following
work after turning the power off and ascertaining that the motor is at rest.
13. HEIGHT OF THE FEED DOG
MS-1261
MS-1261M
WARNING :
To protect against possible personal injury due to abrupt start of the machine, be sure to start the following
work after turning the power off and ascertaining that the motor is at rest.
14. TIMING TO RELEASE THE NEEDLE THREAD TENSION
WARNING :
To protect against possible personal injury due to abrupt start of the machine, be sure to start the following
work after turning the power off and ascertaining that the motor is at rest.
15. ADJUSTING THE TAKE-UP THREAD TENSION CONTROL LEVER
3mm
(MS-1261)
0mm
(MS-1261M)
(
0 mm for MS-1261M
)