JUKI MS-1261M - Folder Types and Needle Gauge Compatibility

– 10 –
ENGLISH
123
Part name Folder (asm.)
Needle gauge
Mark
M297 M298 M299
MH H XH
Code inch mm
E 7/32 5.6 MAM2970DDBA MAM2980AABA MAM2990AABA
F 1/4 6.4 MAM2970EEBA MAM2980BBBA MAM2990BBBA
G 9/32 7.2 MAM2970FFBA MAM2980CCBA MAM2990CCBA
H 5/16 8.0 MAM2970GGBA MAM2980DDBA MAM2990DDBA
K 3/8 9.5 MAM2970HHBA MAM2980EEBA MAM2990EEBA
* A folder is not included in the gauge set.
Code of folder
M297

For medium-weight materials
(Equipped on MS-1261M as standard)
M298

For heavy-weight materials (Optional)
M299

For extra-heavy-weight materials
(Equipped on MS-1261 as standard)
(3) Folder
678
Part name Looper (L) (asm.) Looper (R) (asm.) Looper (C) (asm.)
Needle gauge
Code inch mm
Mark
No.
Mark
No.
Mark
No.
E 7/32 5.6
12968558 1 12968855 1
12969150 1
F 1/4 6.4
G 9/32 7.2
H 5/16 8.0
12968657 2 12968954 2
K 3/8 9.5
MarkMark Mark
Mark