6) When operation panel
7
is connected, various
sewing patterns such as reverse feed stitching
at sewing start, reverse feed stitching at sewing
end, etc. can be set.
Refer to the Instruction Manual for the operation
panel for the details.
7) When sewing is completed, make sure that the
sewing machine has stopped.
Then, press the OFF button
2
of the power
switch to turn OFF the power.
3) When depressing front part
4
of the pedal, the
sewing machine rotates at the number of revolu-
tions in accordance with the depressing amount.
When the pedal is returned to the neutral posi-
tion, the sewing machine stops.
4) When lightly depressing back part
5
of the
pedal, the presser goes up. (PFL type only)
5) When strongly dpressing back part
6
of the
pedal, thread trimming is performed.
2
5
4
6
7
C
Four dots (
C
) in the numeral indicating window
momentarily light up as shown in the gure,
showing that the state has moved to the power
OFF state.
To Next Page
Loading...
