JUNCTEK KH-F Series User Manual

JUNCTEK
27
Turn off output status
and data recording.
11
Date Setting
:W11=1,0,23,2,7,
Set the date to February
7, 2023.
12
Time Setting
:W12=1,0,10,15,0,
Set the time to 10:15:00.
13
Temperature Unit
Setting
:W13=1,0,1,
Last digit 1: ℉, 0: ℃
14
Data Recording
Switch
:W14=1,0,1,
Last digit 0: on, 1: off
15
Full Battery Voltage
Setting
:W15=1,0,1000,
Set full charge voltage to
10.00V
16
Low Battery
Voltage Setting
:W16=1,0,300,
Set low battery voltage
to 3.00V
17
Trickle Charge
Current
:W17=1,0,25,
Trickle charge current
25%
18
Detection Time
:W18=1,0,32,
Set detection time to 3.2
minutes
19
Low Temperature
Protection
:W19=1,0,90,
Set low temperature
protection to -10℃
20
Overvoltage
Protection Setting
:W20=1,216,2000,
Set overvoltage
protection value to
20.00V
21
Undervoltage
Protection Setting
:W21=1,216,2000,
Set undervoltage
protection value to
20.00V
22
Positive
Overcurrent
Protection Setting
:W22=1,216,2000,
Set positive overcurrent
protection value to 20A
23
Negative
Overcurrent
Protection Setting
:W23=1,216,2000,
Set negative overcurrent
protection value to -20A
24
Overpower
Protection Setting
:W24=1,216,2000,
Set over power
protection value to 20W
25
Over-temperature
Protection Setting
:W25=1,151,150,
:W25=1,211,210,
Set over temperature
protection value to 50
℃
Set over temperature
protection value to 110
℃
26
Protection
Recovery Time
Setting
:W26=1,31,30,
Set protection recovery
time to 30s
27
Delay Time Setting
:W27=1,31,30,
Set delay time to 30s
28
Battery Capacity
Setting
:W28=1,216,2000,
Set battery capacity to
200.0Ah
29
Voltage Calibration
Setting
:W29=1,121,120,
:W29=1,81,80,
Set voltage calibration to
20, increase voltage
fine-tuning.
Set voltage calibration to
-20, decrease voltage

JUNCTEK KH-F Series Specifications

General

Brand	JUNCTEK
Model	KH-F Series
Category	Monitor
Language	English