EasyManuals Logo

JUNCTEK KH-F Series User Manual

JUNCTEK KH-F Series
60 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Page #33 background imageLoading...
Page #33 background image
JUNCTEK
28
fine-tuning.
(The value only
represents the
fine-tuning factor. The
larger the absolute value
of the value, the greater
the amplitude of the
fine-tuning.)
30
Current Calibration
Setting
:W30=1,121,120,
:W30=1,81,80,
Set current calibration to
20, increase current
fine-tuning.
Set current calibration to
-20, decrease current
fine-tuning.
(The value only
represents the
fine-tuning factor. The
larger the absolute value
of the value, the greater
the amplitude of the
fine-tuning.)
31
Temperature
Calibration Setting
:W31=1,104,103,
:W31=1,99,98,
Set temperature
calibration to Fahrenheit
±5
.
32
Time Adjustment
:W32=1,99,98,
Set the time to be a bit
slower, 100 is original
(TBD).
33
Function Reserved
TBD
TBD
34
Relay Type Setting
:W34=1,2,1,
:W34=1,0,0,
Set the relay type to
normally closed.
Set the relay type to
normally open.
35
Factory Reset
:W35=1,2,1,
Perform a factory reset.
36
Current Multiple
Setting
:W36=1,4,3,
Set current multiplier to 3
(Only valid for Hall
version).
37
Bluetooth
Password Setting
:W37=1,0,1234,
Set Bluetooth password
to 1234.
60
Setting Battery
Remaining
Capacity
Percentage
:W60=1,51,50,
Set battery remaining
capacity percentage to
50%.
61
Current Zeroing
:W61=1,2,1,
Perform current zeroing.
62
Clear Cumulative
Data and Set
Record Interval
:W62=1,0,1,
Perform cumulative data
clearing and set
recording interval to 2
seconds/time.

Questions and Answers:

Question and Answer IconNeed help?

Do you have a question about the JUNCTEK KH-F Series and is the answer not in the manual?

JUNCTEK KH-F Series Specifications

General IconGeneral
BrandJUNCTEK
ModelKH-F Series
CategoryMonitor
LanguageEnglish