JUNCTEK KH-F Series User Manual

JUNCTEK
29
(3). R command
The R command is a read command, and its command format is basically the
same as the write command format, which is not repeated here. The following
are example data returned by the machine.
Read
send
s
com
man
d
machine returns data
Read Description
Read
basic
inform
ation
of the
machi
ne
:R00
=1,2,
1,
:r00=1,177,4140,116,0
,
1 represents the communication
address;
177 represents the checksum;
The first 4 in 4140 represents the KH
series, 1 represents 120V, and 40
represents 400A;
116 represents version 1.16;
0 represents the machine serial
number.
Read
all
meas
ureme
nt
values
:R50
=1,2,
1,
:r50=1,123,1198,1090,
7421,2749,437,298,11
3,0,0,1,69,100,230208,
112418,
1 represents the communication
address;
123 represents the checksum;
1198 represents the voltage at
11.98V;
1090 represents the current at
10.90A;
7421 represents the remaining
battery capacity at 7.421Ah;
2749 represents the discharge
electricity consumption at
2.749KWh;
437 represents the charging
electricity consumption at
0.437KWh;
298 represents the operational
record value at 298;
113 represents the environmental
temperature at 13℃;
0 represents a function to be
determined;
0 represents the output status as
ON; (0-ON, 1-OVP, 2-OCP, 3-LVP,
4-NCP, 5-OPP, 6-OTP, 99-OFF)
1 represents the current direction,
currently charging current;
(0-discharge, 1-charging)
69 represents the remaining time at
69 minutes;
100 represents the time adjustment
(to be determined);
230208 represents the date as

JUNCTEK KH-F Series Specifications

General

Brand	JUNCTEK
Model	KH-F Series
Category	Monitor
Language	English