JUNCTEK
Open the APP on the homepage and click the search icon in the upper right
corner to search for the corresponding Bluetooth device. After selecting the
corresponding Bluetooth device, the interface will display "Connected," and the
search icon in the upper right corner will change to "Disconnect," with the
machine model displayed, indicating that the connection has been completed.
Refer to Figures 3-4-10, 3-4-11, and 3-4-12.
ļ Main screen operations
Output status control switch: Click to control the output status. Different
statuses will be displayed under different protection conditions, as shown in
Figure 3-4-13 when the output status is closed and Figure 3-4-14 in
overvoltage protection status.
Voltage calibration: Click on the voltage value and the 'Voltage calibration'
dialog box will appear, allowing for fine tuning by entering the corresponding
value, as shown in Figure 3-4-15.
Current calibration: Click on the current value and the 'Current calibration'
dialog box will appear, allowing for fine tuning by entering the corresponding
value, as shown in Figure 3-4-16.
Voltage range: Click on the voltage scale, and the 'Voltage range' dialog box
will appear, allowing for adjustment of the voltage gauge scale by entering the
corresponding value, as shown in Figure 3-4-17.
Max. current : Click on the max.current, and the 'Max. current ' dialog box will
appear, allowing for adjustment of the maximum scale value of the current
gauge by entering the corresponding value, as shown in Figure 3-4-18.
To Next Page
Loading...
General