11
If a leakage from the battery occurs,
avoid touching it as it is corrosive. If
the liquid gets in contact with your
clothes, wash them with clean water. If it gets in
contact with your eyes, do not rub but wash
thoroughly under clean water and contact a
physician.
When charging your battery, make
sure the connectors are clean and free
of water or dirt before connecting the
charger.
The warning labels on the battery and
charger present important
information for your safety. Make sure
to follow the instructions carefully.
Turning the system on
Do not turn the power assist system
On before standing over the bike or
being seated properly with at least one
foot on the ground. An unexpected ignition of the
power assistance while getting on the bike can
result in serious injuries.
This power assist system has an auto
shut off function. If there is no
operation or input from the LCD
controller for some time, it will shut down
automatically.
To turn the power assist system On:
1. First turn the battery power On
Press and hold the Power button on the
battery casing. LED indicator will light up
confirming the battery is On.
2. Then turn the LCD Controller On
Press and hold the LCD controller’s power
button for 2 seconds. The LCD screen
will light up.
In the event that an error logo shows
up when the LCD screen lights up do
not ride your bicycle. Contact a
qualified dealer to have your power assist system
checked.
Turning the system off
Do not get off the bike before having
turned the power assist system Off. An
unexpected ignition of the power
assistance while getting off the bike
can result in serious injuries.
To turn the power assist system Off:
Press and hold the Power button on the
battery casing. The button’s LED indicator
will turn off. The motor and LCD controller
won’t receive power anymore. LCD screen
will quickly shut down. The power assist
system is then Off.
To Next Page
Loading...
