37
08.11 EN
4.3 Attachment capacity plate
The attachment capacity plate is next to the truck's capacity plate and gives the
truck's capacity Q (in kg) in conjunction with the respective attachment. The serial
number for the attachment indicated on the capacity plate must match the data plate
of the attachment.
Z For loads with a centre of gravity greater than 500 mm, the capacities are reduced
by the difference of the altered centre of gravity.
5 Stability
The truck's stability has been tested according to latest technological standards.
These take into account the dynamic and static tipover forces that can occur if used
correctly.
Stability can also be affected by the following factors:
– Tyre type
–Mast
– Attachment
– Transported load (size, weight and centre of gravity)
WARNING!
Loss of stability can cause accidents
Changing the components can alter the stability.
To Next Page