Jungheinrich ECE 220 User Manual

1007.GB
E 26
Z
Travel is disabled while the parameters are being entered. If the setting is to be
checked in programming mode, follow this sequence:
– Select the edited travel program after changing the parameter value, confirm with
the Set key (22).
– The truck is now in travel mode and can be checked.
– To continue setting, confirm with the Set key (22) again.
The following parameters may be entered.
Travel programs
No. Function Setting
range
Standard
setting
Comments
Travel program 1
100 Acceleration in
Pedestrian mode
0 - 9 2 Value of
parameter 101 >=
Parameter 100
101 Acceleration in
Rider mode
0 - 9 2
102 Coasting brake in
rider mode
0 - 9 2
103 Coasting brake in
Pedestrian mode
0 - 9 2 Value of
parameter 103 >=
Parameter 102
104 Maximum speed in drive
direction via controller
0 - 9 8 Depending on
travel switch
105 Pedestrian speed in drive
direction via controller
0 - 9 5 Depending on
travel switch
106 Pedestrian speed in drive
direction via pushbutton in
backrest
0 - 9 3 Not dependant on
travel switch
(fixed speed)
108 Maximum speed in fork
direction via controller
0 - 9 8 Depending on
travel switch
109 Pedestrian speed in fork
direction via controller
0 - 9 5 Depending on
travel switch
110 Pedestrian speed in fork
direction via pushbutton in
backrest
0 - 9 3 Not dependant on
travel switch
(fixed speed)
1007.GB
E 26
Z
Travel is disabled while the parameters are being entered. If the setting is to be
checked in programming mode, follow this sequence:
– Select the edited travel program after changing the parameter value, confirm with
the Set key (22).
– The truck is now in travel mode and can be checked.
– To continue setting, confirm with the Set key (22) again.
The following parameters may be entered.
Travel programs
No. Function Setting
range
Standard
setting
Comments
Travel program 1
100 Acceleration in
Pedestrian mode
0 - 9 2 Value of
parameter 101 >=
Parameter 100
101 Acceleration in
Rider mode
0 - 9 2
102 Coasting brake in
rider mode
0 - 9 2
103 Coasting brake in
Pedestrian mode
0 - 9 2 Value of
parameter 103 >=
Parameter 102
104 Maximum speed in drive
direction via controller
0 - 9 8 Depending on
travel switch
105 Pedestrian speed in drive
direction via controller
0 - 9 5 Depending on
travel switch
106 Pedestrian speed in drive
direction via pushbutton in
backrest
0 - 9 3 Not dependant on
travel switch
(fixed speed)
108 Maximum speed in fork
direction via controller
0 - 9 8 Depending on
travel switch
109 Pedestrian speed in fork
direction via controller
0 - 9 5 Depending on
travel switch
110 Pedestrian speed in fork
direction via pushbutton in
backrest
0 - 9 3 Not dependant on
travel switch
(fixed speed)

Jungheinrich ECE 220 Specifications

General

Brand	Jungheinrich
Model	ECE 220
Category	Forklifts
Language	English