Jungheinrich ERE Series - Collecting and Depositing Loads

E 11
1113.GB
4.3 Collecting and depositing loads
M
Before picking up a load, the driver must
ensure that it is correctly palletised and
that the capacity of the truck is not
exceeded. It is forbidden to collect long
loads at an angle.
– Fully insert the truck and the load
handler underneath the load unit.
Z
When the operator platform is unfolded
it must be occupied by the operator to
release lifting/lowering (similar to trucks
with a fixed operator platform).
Z
The lifting and lowering speeds are
specified.
Lift
– Press the “Lift” (8) button until you reach the desired lift height.
M
Release the button as soon as you reach the limit position of the load handler.
Lower
– Press the “Lower ” button (7) until you reach the required lifting height.
M
Do not deposit the load in a sudden manner.
77
88
E 11
1113.GB
4.3 Collecting and depositing loads
M
Before picking up a load, the driver must
ensure that it is correctly palletised and
that the capacity of the truck is not
exceeded. It is forbidden to collect long
loads at an angle.
– Fully insert the truck and the load
handler underneath the load unit.
Z
When the operator platform is unfolded
it must be occupied by the operator to
release lifting/lowering (similar to trucks
with a fixed operator platform).
Z
The lifting and lowering speeds are
specified.
Lift
– Press the “Lift” (8) button until you reach the desired lift height.
M
Release the button as soon as you reach the limit position of the load handler.
Lower
– Press the “Lower ” button (7) until you reach the required lifting height.
M
Do not deposit the load in a sudden manner.
77
88