EasyManua.ls Logo

Juniper 200 Series - Chapter 1 Overview

Juniper 200 Series
40 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
NetScreen-200 Series 1
1
Chapter 1
Overview
This chapter provides detailed descriptions of the NetScreen-200 Series system devices
and their components.
Topics in this chapter include:
“NetScreen-200 Systems” on page 2
“NetScreen-204 Device” on page 2
“NetScreen-208 Device” on page 2
“The Front Panel” on page 3
“System Status LED Display” on page 3
“Asset Recovery Pinhole” on page 4
“Console and Modem Ports” on page 5
“Compact Flash Card Slot” on page 5
“Ethernet Interfaces” on page 6
“The Rear Panel” on page 6
“Power Supplies” on page 6
“Power Fuse” on page 7
Note: For safety warnings and instructions, please refer to the NetScreen Safety Guide.
The instructions in this guide warn you about situations that could cause bodily injury.
Before working on any equipment, be aware of the hazards involved with electrical
circuitry and be familiar with standard practices for preventing accidents.

Table of Contents

Related product manuals