Need help?Do you have a question about the Juniper EX Series and is the answer not in the manual?
General| Series | EX Series |
|---|---|
| Category | Switch |
| Layer | Layer 2/3 |
| Operating System | Junos OS |
| Managed | Yes |
| ACLs | Yes |
| Port Density | Varies by model |
| Power over Ethernet (PoE) | Available on some models |
| Virtual Chassis | Supported on some models |
| Form Factor | Fixed configuration, Modular |
| Switching Capacity | Varies by model |
| Forwarding Rate | Varies by model |
| Power Supply | Varies by model (AC or DC, redundant options available) |
| Management | CLI, Web UI, SNMP |
| Redundancy | Power supply, fan, Virtual Chassis |
| Latency | Varies by model |
| Jumbo Frames | Supported |
| VLAN Support | Yes |
| MAC Address Table Size | Varies by model |
| QoS | Yes |
| Energy Efficiency | EEE (802.3az) |
| Dimensions | Varies by model |
| Weight | Varies by model |
| Operating Temperature | 0° to 45° C |
| Storage Temperature | -40° to 70° C |
| Humidity | 5% to 90% non-condensing |
| MTBF | Varies by model |
| Warranty | Limited Lifetime |
Provides an overview of the J-Web interface for managing EX Series switches.
Details the features and first look of the J-Web Application package.
Explains how to establish and manage J-Web sessions.
Describes the initial dashboard view for EX Series switches.
Introduces the methods for configuring the switch using J-Web.
Explains alarm types, severity levels, and terms.
Details how to commit configuration changes using J-Web options.
Provides steps to launch and log into the J-Web interface.
Explains using the Point & Click CLI editor for configuration.
Details using the CLI Editor for text-based configuration editing.
Provides access to the Junos OS CLI via the J-Web interface.
Enables viewing the entire configuration file in text format.
Guides on initial connection and configuration of EX Series switches.
Details on setting the date and time on the EX Series switch.
Explains how to configure system identity details for the switch.
Covers enabling HTTP/HTTPS access for managing the switch.
Guides on creating SSL certificates for secure web access.
Explains how to schedule or perform a switch reboot or halt.
Details how to define Class of Service (CoS) drop profiles.
Explains how to define CoS classifiers for packet classification.
Guides on defining CoS code-point aliases for bit values.
Details on assigning CoS components to logical or physical interfaces.
Explains how to define CoS forwarding classes for queues.
Guides on defining CoS rewrite rules for outgoing packets.
Details on defining CoS schedulers for congestion control.
Explains how to configure CoS scheduler maps.
Covers configuring 802.1X security settings on EX Series switches.
Details on configuring LLDP global and port settings.
Explains how to configure port mirroring for traffic analysis.
Guides on configuring port security features for VLANs and interfaces.
Details on controlling routes stored and retrieved in the routing table.
Explains how to configure firewall filters for traffic control.
Guides on adding, editing, or deleting VLANs on EX Series switches.
Details on configuring STP, RSTP, and MSTP for Layer 2 loop prevention.
Explains how to configure IGMP snooping for multicast traffic.
Guides on configuring redundant trunk groups for network recovery.
Details on configuring properties for Gigabit, 10-Gigabit, and 40-Gigabit interfaces.
Explains how to aggregate Ethernet interfaces into a virtual link or LAG.
Guides on configuring Power over Ethernet (PoE) settings for interfaces.
Details on configuring DHCP pools and static bindings.
Guides on configuring system identification, SNMP communities, and traps.
Explains how to create BGP peering sessions.
Guides on creating multiarea OSPF networks.
Details on configuring RIP networks.
Explains how to configure static routes for EX Series switches.
Details on configuring and sending probes for performance monitoring.
Describes how to view RPM information graphically.
Guides on updating the J-Web software packages.
Details on downloading and installing Junos OS upgrades.
Explains managing configuration files via history.
Guides on setting or deleting the rescue configuration.
Details on uploading configuration files from a local system.
Explains rotating and deleting log, temporary, and crash files.
Guides on adding, editing, and deleting user accounts.
Details on purchasing, installing, and managing software licenses.
Explains how to register the switch for technical assistance.
Guides on generating reports for technical support.
Details on configuring Virtual Chassis for scalability.
Guides on configuring Virtual Chassis for specific EX switch models.
Explains how to enable Virtual Chassis mode on EX8200 switches.
Details on configuring an EX8200 Virtual Chassis.
View active alarms, including type, severity, and description.
Filter and view system log messages for EX Series switches.
View interface status, bandwidth, and traffic statistics.
View routing tables and related information.
View details of the Ethernet switching table and MAC addresses.
Display mapping of CoS values to forwarding class and loss priority.
View information about Virtual Chassis members and ports.
Display details of authenticated and failed authentication users.
View DHCP snooping database and ARP inspection details.
Guides on creating and uploading configuration files.
Explains managing configuration files via history.
Guides on updating the J-Web software packages.
Details on downloading and installing Junos OS upgrades.
Details on purchasing, installing, and managing software licenses.
Guides on identifying and rectifying interface configuration or connectivity issues.
To Next Page
