Juniper EX Series - Monitoring RIP Routing Information; Table 97: Summary of Key RIP Routing Output Fields

Table 96: Summary of Key OSPF Routing Output Fields (continued)
Additional InformationValuesField
The activity time.Activity Time
Area that the neighbor is in.Area
Option bits received in the hello packets from
the neighbor.
Options
Address of the designated router.DR Address
Address of the backup designated router.BDR Address
Length of time since the neighbor came up.Uptime
Length of time since the adjacency with the
neighbor was established.
Adjacency
Related
Documentation
Configuring an OSPF Network (J-Web Procedure) on page 139•
• Layer 3 Protocols Supported on EX Series Switches
Monitoring RIP Routing Information
Purpose NOTE: This topic applies only to the J-Web Application package.
Use the monitoring functionality to monitor RIP routing on routing devices.
Action To view RIP routing information in the J-Web interface, select Monitor > Routing > RIP
Information.
To view RIP routing information in the CLI, enter the following CLI commands:
• show rip statistics
• show rip neighbor
Meaning Table 97 on page 212 summarizes key output fields in the RIP routing display in the J-Web
interface.
Table 97: Summary of Key RIP Routing Output Fields
Additional InformationValuesField
RIP Statistics
Copyright © 2017, Juniper Networks, Inc.212
J-Web Application Package User Guide for EX Series Switches, Release 14.1X53-A1