Juniper EX Series User Manual

•
Delete—Deletes an existing BGP group.
•
Disable—Disables BGP configuration.
3. To modify BGP global settings, click Edit in the Global Information section. Enter
information as described in Table 69 on page 138.
Table 68: BGP Routing Configuration Summary
Your ActionFunctionField
General tab
Select the option: Internal or External.Specifies whether the group is an internal
BGP (IBGP) group or an external BGP
(EBGP) group.
Group Type
Type a new name or select and edit the name.Specifies the name for the group.Group Name
Type the routing device’s 32-bit AS number, in dotted decimal
notation.
If you enter an integer, the value is converted to a 32-bit
equivalent. For example, if you enter 3, the value assigned to
the AS is 0.0.0.3.
Sets the unique numeric identifier of the
AS in which the routing device is configured.
ASN
Type or select and edit the value.Specifies the degree of preference for an
external route. The route with the highest
local preference value is preferred.
Preference
Type or select and edit the IPv6 or IPv4 address to be used
as the identifier.
Specifies the cluster identifier to be used
by the route reflector cluster in an internal
BGP group.
Cluster Id
Type or select and edit the description.Specifies the text description of the global,
group, or neighbor configuration.
Description
To enable route flap damping, select the check box.
To disable route flap damping do not select the check box.
Specifies whether route flap damping is
enabled or not.
Damping
To enable advertising inactive routes, select the check box.
To disable advertising inactive routes, do not select the check
box.
Specifies whether BGP advertises the best
route even if the routing table did not select
it to be an active route.
Advertise Inactive
Routes
To enable advertising peer AS routes, select the check box.
To disable advertising peer AS routes, do not select the check
box.
Specifies whether to disable the default
behavior of suppressing AS routes.
Advertise Peer
AS Routes
Neighbors tab
Type the IPv4 address of the peer.Configures a neighbor (peer).Dynamic
Neighbors
Copyright © 2017, Juniper Networks, Inc.136
J-Web Application Package User Guide for EX Series Switches, Release 14.1X53-A1

Juniper EX Series Specifications

General

Brand	Juniper
Model	EX Series
Category	Switch
Language	English