Table 104: Summary of Key CoS Classifier Output Fields (continued)
Additional InformationValuesField
Internal index of the classifier.Index
CoS value of the incoming packets, in bits.
These values are used for classification.
Incoming CoS Value
Forwarding class that the classifier assigns
to an incoming packet. This class affects the
forwarding and scheduling policies that are
applied to the packet as it transits the
switch.
Assign to Forwarding Class
Loss priority value that the classifier assigns
to the incoming packet based on its CoS
value.
Assign to Loss Priority
Related
Documentation
Defining CoS Classifiers (CLI Procedure)•
• Defining CoS Classifiers (J-Web Procedure) on page 60
• Example: Configuring CoS on EX Series Switches
Monitoring CoS Drop Profiles
Purpose NOTE: This topic applies only to the J-Web Application package.
J-Web Application package Release 14.1X53-A2 does not support Class of
Service (CoS) on EX4600 switches.
Use the monitoring functionality to view data point information for each CoS random
early detection (RED) drop profile on the EX8200 switch.
Action To monitor CoS RED drop profiles in the J-Web interface, select Monitor > Class of Service
> RED Drop Profiles.
To monitor CoS RED drop profiles in the CLI, enter the following CLI command:
show class-of-service drop-profile
Meaning Table 105 on page 227 summarizes the key output fields for CoS RED drop profiles.
Copyright © 2017, Juniper Networks, Inc.226
J-Web Application Package User Guide for EX Series Switches, Release 14.1X53-A1
To Next Page
Loading...
Need help?
General
