show class-of-service code-point-aliases
Meaning Table 106 on page 228 summarizes key output fields for CoS value aliases.
Table 106: Summary of Key CoS Value Alias Output Fields
Additional InformationValuesField
To display aliases and bit patterns, click the
plus sign (+).
Type of the CoS value:
• dscp—Examines Layer 3 packet headers
for IP packet classification.
• ieee-802.1—Examines Layer 2 packet
headers for packet classification.
• inet-precedence—Examines Layer 3
packet headers for IP packet
classification.
CoS Value Type
Name given to a set of bits—for example,
af11 is a name for 001010 bits.
CoS Value Alias
Set of bits associated with an alias.CoS Value
Related
Documentation
Defining CoS Code-Point Aliases (CLI Procedure)•
• Defining CoS Code-Point Aliases (J-Web Procedure) on page 62
• Example: Configuring CoS on EX Series Switches
Monitoring CoS Forwarding Classes
Purpose NOTE: This topic applies only to the J-Web Application package.
J-Web Application package Release 14.1X53-A2 does not support Class of
Service (CoS) on EX4600 switches.
View the current assignment of CoS forwarding classes to queues on the switch.
Action To monitor CoS forwarding classes in the J-Web interface, select Monitor > Class of
Service > Forwarding Classes.
To monitor CoS forwarding classes in the CLI, enter the following CLI command:
show class-of-service forwarding-class
Meaning Table 107 on page 229 summarizes key output fields for CoS forwarding classes.
Copyright © 2017, Juniper Networks, Inc.228
J-Web Application Package User Guide for EX Series Switches, Release 14.1X53-A1
To Next Page
Loading...
Need help?
General
