Table 69: BGP Global Settings (continued)
Your ActionFunctionField
Click Add to add an import policy.
Click Move up or Move down to move the selected
policy up or down the list of policies.
Click Remove to remove an import policy.
Specifies one or more routing policies to routes being
imported into the routing table from BGP.
Import Policy
Click Add to add an export policy.
Click Move up or Move down to move the selected
policy up or down the list of policies.
Click Remove to remove an export policy.
Specifies one or more policies to routes being
exported from the routing table into BGP.
Export Policy
Trace Options tab
Type or select and edit the name.Specifies the name of the file to receive the output
of the tracing operation.
File Name
Type or select and edit the value.Specifies the maximum number of trace files.Number of Files
Type or select and edit the value.Specifies the maximum size for each trace file.File Size
Select True to allow any user to read the file.
Select False to disallow all users being able to read
the file.
Specifies whether the trace file can be read by any
user or not.
World Readable
Select a value from the list.Specifies the tracing operation to perform.Flags
Related
Documentation
Monitoring BGP Routing Information on page 213•
• Layer 3 Protocols Supported on EX Series Switches
Configuring an OSPF Network (J-Web Procedure)
NOTE: This topic applies only to the J-Web Application package.
You can use the J-Web interface to create multiarea OSPF networks on an EX Series
switch.
To configure a multiarea OSPF network:
139Copyright © 2017, Juniper Networks, Inc.
Chapter 11: Configuring Layer 3 Protocols
To Next Page
Loading...
Need help?
General
