Juniper EX Series User Manual

% openssl req–x509 –nodes –newkey rsa:1024 –keyout filename.pem -out filename.pem
where filename is the name of a file in which you want the SSL certificate to be
written—for example, my-certificate.
2. When prompted, type the appropriate information in the identification form. For
example, type US for the country name.
3. Display the contents of the file that you created.
cat my-certificate.pem
You can use the J-Web Configuration page to install the SSL certificate on the switch.
To do this, copy the file containing the certificate from the BSD or Linux system to the
switch. Then open the file, copy its contents, and paste them into the Certificate box on
the J-Web Secure Access Configuration page.
You can also use the following CLI statement to install the SSL certificate on the switch:
[edit]
user@switch# set security certificates local my-signed-cert load-key-file my-certificate.pem
Related
Documentation
Configuring Management Access for the EX Series Switch (J-Web Procedure) on
page 52
•
• Security Features for EX Series Switches Overview
Rebooting or Halting the EX Series Switch (J-Web Procedure)
You can use the J-Web interface to schedule a reboot or to halt the switching platform.
To reboot or halt the switching platform by using the J-Web interface:
1. In the J-Web interface, select Maintain > Reboot.
2. Select one:
•
Reboot Immediately—Reboots the switching platform immediately.
•
Reboot in number of minutes—Reboots the switch in the number of minutes from
now that you specify.
•
Reboot when the system time is hour:minute —Reboots the switch at the absolute
time that you specify, on the current day. You must select a 2-digit hour in 24-hour
format and a 2-digit minute.
•
Halt Immediately— Stops the switching platform software immediately. After the
switching platform software has stopped, you can access the switching platform
through the console port only.
3. (Optional) In the Message box, type a message to be displayed to any users on the
switching platform before the reboot occurs.
Copyright © 2017, Juniper Networks, Inc.56
J-Web Application Package User Guide for EX Series Switches, Release 14.1X53-A1

Juniper EX Series Specifications

General

Brand	Juniper
Model	EX Series
Category	Switch
Language	English