Related
Documentation
Configuring MAC Table Aging (CLI Procedure)•
• Understanding Bridging and VLANs on EX Series Switches
Monitoring IGMP Snooping
Purpose NOTE: This topic applies only to the J-Web Application package.
Use the monitoring feature to view status and information about IGMP snooping
configuration on your EX Series switch.
Action To display IGMP snooping details in the J-Web interface, select Monitor > Switching >
IGMP Snooping.
To display IGMP snooping details in the CLI, enter the following commands:
• show igmp-snooping route
• show igmp-snooping statistics
• show igmp-snooping vlans
NOTE: On EX4300 switches, to display IGMP snooping details in the CLI,
enter the following commands:
• show igmp snooping interface
• show igmp snooping statistics
• show multicast snooping next-hops
• show multicast snooping route
Meaning Table 102 on page 220 summarizes the IGMP snooping details displayed.
Table 102: Summary of IGMP Snooping Output Fields
ValuesField
IGMP Snooping Monitor
The VLAN for which IGMP snooping is enabled.VLAN
Indicates the interfaces configured as switching interfaces
that are associated with the multicast router.
Interfaces
Indicates the number of the multicast groups learned by the
VLAN.
Groups
Copyright © 2017, Juniper Networks, Inc.220
J-Web Application Package User Guide for EX Series Switches, Release 14.1X53-A1
To Next Page
Loading...
