Juniper EX Series User Manual

Using the J-Web CLI Terminal
NOTE: This topic applies only to the J-Web Application package.
The J-Web CLI terminal provides access to the Junos OS command-line interface (CLI)
through the J-Web interface. The functionality and behavior of the CLI available through
the CLI Terminal page is the same as that of the Junos OS CLI available through the
switch console. The CLI terminal supports all CLI commands and other features such as
CLI help and autocompletion. Using the CLI terminal page, you can fully configure, monitor,
and manage the switch.
This topic covers:
•
Configuring the Web Browser on page 42
•
Setting Domain Name, Hostname, and Name Server on page 42
•
Enabling SSH on your system on page 43
•
Sample Configuration on an EX Series Switch on page 43
Configuring the Web Browser
Configure your Web browser as follows:
•
Install Java Runtime Environment (JRE) version 1.4 or later on your system. JRE is a
software package that must be installed on the client system to run Java applications.
You can download the latest version of JRE from the Java software website
http://www.java.com/. Installing JRE installs Java plug-ins, which once installed, load
automatically and transparently to render Java applets.
NOTE: By default Mozilla Firefox has blocked JRE versions earlier than
1.6.0_31 and 1.7.0 through 1.7.0_2. However, Mozilla Firefox users can still
click Add-ons > Plugin to enable Java.
•
Set your browser to support and enable Java applets. To know more about checking
the status of java applets in your browser see
http://java.com/en/download/help/enable_browser.xml.
Setting Domain Name, Hostname, and Name Server
Configure the domain name and hostname of the switch on your system. Ensure that
the DNS server setting is correct. DNS name resolution must happen properly. Ensure
that there is connectivity between the client and the management device.
You can set the domain name, hostname, and the DNS name server either through the
J-Web interface or the CLI:
•
To set through the J-Web interface:
Copyright © 2017, Juniper Networks, Inc.42
J-Web Application Package User Guide for EX Series Switches, Release 14.1X53-A1

Juniper EX Series Specifications

General

Series	EX Series
Category	Switch
Layer	Layer 2/3
Operating System	Junos OS
Managed	Yes
ACLs	Yes
Port Density	Varies by model
Power over Ethernet (PoE)	Available on some models
Virtual Chassis	Supported on some models
Form Factor	Fixed configuration, Modular
Switching Capacity	Varies by model
Forwarding Rate	Varies by model
Power Supply	Varies by model (AC or DC, redundant options available)
Management	CLI, Web UI, SNMP
Redundancy	Power supply, fan, Virtual Chassis
Latency	Varies by model
Jumbo Frames	Supported
VLAN Support	Yes
MAC Address Table Size	Varies by model
QoS	Yes
Energy Efficiency	EEE (802.3az)
Dimensions	Varies by model
Weight	Varies by model
Operating Temperature	0° to 45° C
Storage Temperature	-40° to 70° C
Humidity	5% to 90% non-condensing
MTBF	Varies by model
Warranty	Limited Lifetime