Table 102: Summary of IGMP Snooping Output Fields (continued)
ValuesField
The VLAN for which IGMP snooping is enabled.VLAN
NOTE: This option is not supported on EX4300 switches.
Indicates the multicast groups learned by the VLAN.Group
NOTE: This option is not supported on EX4300 switches.
Specifies the next hop assigned by the switch after performing
the route lookup.
Next-Hop
NOTE: This option is not supported on EX4300 switches.
Statistics
Displays the number of packets sent or received, or the number
of received errors.
Packets per Vlan
NOTE: This option is supported only on EX4300 switches.
Displays the statistics name and statistics count. The statistics
names are:
• Bad Length
• Bad Checksum
• Bad Receive If
• Rx non-local
• Timed out
Global
NOTE: This option is supported only on EX4300 switches.
Multicast Snooping Nexthops
Next-hop identifier of the prefix. The identifier is returned by
the routing device's Packet Forwarding Engine.
ID
NOTE: This option is supported only on EX4300 switches.
Number of cache entries that are using this next hop.Reference Count
NOTE: This option is supported only on EX4300 switches.
Kernel reference count for the next hop.Kernel Reference Count
NOTE: This option is supported only on EX4300 switches.
Interface names associated with each multicast next-hop ID.Downstream Interface
NOTE: This option is supported only on EX4300 switches.
Related
Documentation
show igmp-snooping route•
• show igmp-snooping statistics
• show igmp-snooping vlans
Copyright © 2017, Juniper Networks, Inc.222
J-Web Application Package User Guide for EX Series Switches, Release 14.1X53-A1
To Next Page
Loading...
