Juniper ACX1100 - Figure 24: Connecting AC Power to the Router

6. Repeat Step 1 through Step 5 for the remaining power supply.
7. Observe the system LED on the router. If an AC power supply is functioning normally,
the system LED lights green steadily.
If the system LED is not lit, the power supply is not functioning normally. Repeat the
cabling procedures.
Figure 24: Connecting AC Power to the Router
g006688
Related
Documentation
• ACX1100 AC Power Specifications on page 59
Copyright © 2017, Juniper Networks, Inc.108
ACX1000 and ACX1100 Universal Access Router