Juniper ACX2100

Configuring FEC 129 VPLS Mesh Groups for LDP BGP Interworking . . . . . . 1275
Configuring Switching Between Pseudowires Using VPLS Mesh Groups . . 1276
Configuring Integrated Routing and Bridging Support for LDP BGP
Interworking with VPLS . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 1277
Configuring Inter-AS VPLS with MAC Processing at the ASBR . . . . . . . . . . 1277
Inter-AS VPLS with MAC Operations Configuration Summary . . . . . . . 1277
Configuring the ASBRs for Inter-AS VPLS . . . . . . . . . . . . . . . . . . . . . . . 1278
Interoperability Between BGP Signaling and LDP Signaling in VPLS . . . . . . . . . 1279
LDP-Signaled and BGP-Signaled PE Router Topology . . . . . . . . . . . . . . . . 1279
Flooding Unknown Packets Across Mesh Groups . . . . . . . . . . . . . . . . . . . . . 1281
Unicast Packet Forwarding . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 1281
PE Router Mesh Groups for VPLS Routing Instances . . . . . . . . . . . . . . . . . . . . . . 1281
Example: Configuring BGP-Based H-VPLS Using Different Mesh Groups for Each
Spoke Router . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 1282
Example: Configuring LDP-Based H-VPLS Using a Single Mesh Group to
Terminate the Layer 2 Circuits . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 1304
Example: Configuring H-VPLS With VLANs . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 1310
Part 9 Monitoring and Troubleshooting ACX Series Routers
Chapter 36 Diagnosing Cable States Using Time Domain Reflectometry (TDR) . . . . 1327
Time Domain Reflectometry on ACX Series Routers Overview . . . . . . . . . . . . . . 1327
Diagnosing a Faulty Twisted-Pair Cable on ACX Series Routers . . . . . . . . . . . . 1330
Chapter 37 Configuring RFC 2544-Based Benchmarking Tests . . . . . . . . . . . . . . . . . . 1335
RFC 2544-Based Benchmarking Tests Overview . . . . . . . . . . . . . . . . . . . . . . . . 1335
Layer 2 and Layer 3 RFC 2544-Based Benchmarking Test Overview . . . . . . . . . 1338
Configuring RFC 2544-Based Benchmarking Tests . . . . . . . . . . . . . . . . . . . . . . . 1341
Configuring a Test Profile for an RFC 2544-Based Benchmarking Test . . . 1346
Configuring a Test Name for an RFC 2544-Based Benchmarking Test . . . 1348
Starting and Stopping the RFC 2544-Based Benchmarking Test . . . . . . . . 1354
Copying an RFC 2544-Based Benchmarking Test Result . . . . . . . . . . . . . . 1354
Configuring Ethernet Loopback for RFC 2544-Based Benchmarking Tests . . . . 1355
RFC 2544-Based Benchmarking Test States . . . . . . . . . . . . . . . . . . . . . . . . . . . 1358
Example: Configuring an RFC 2544-Based Benchmarking Test for Layer 3 IPv4
Services . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 1359
Example: Configuring an RFC 2544-Based Benchmarking Test for NNI Direction
of Ethernet Pseudowires . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 1367
Example: Configuring an RFC 2544-Based Benchmarking Test for UNI Direction
of Ethernet Pseudowires . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 1375
Chapter 38 Configuring Port, VLAN, and Flow Mirroring . . . . . . . . . . . . . . . . . . . . . . . . . 1385
Port, VLAN, and Flow Mirroring Overview . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 1385
Port, VLAN, and Flow Mirroring on ACX5000 Series Routers . . . . . . . . . . . . . . . 1386
Configuring Port, VLAN, and Flow Mirroring on ACX5000 Series Routers . . . . . 1388
Configuring Port Mirroring on ACX5000 Series Routers . . . . . . . . . . . . . . . 1388
Configuring the Input as Logical Interface and the Output as Logical
Interface . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 1389
Configuring the Input as a Logical Interface and the Ouput as VLAN . . 1389
xxixCopyright © 2017, Juniper Networks, Inc.
Table of Contents