Juniper ACX2100 - Cos for NAT Services on ACX Series Universal Access Routers

dscp af11;
}
then {
count ptt-mcs-counter;
forwarding-class network-control;
accept;
}
}
term user-video {
from {
dscp af21;
}
then {
count user-video-counter;
loss-priority low;
forwarding-class assured-forwarding;
accept;
}
}
term user-cmcs {
from {
dscp af12;
}
then {
count user-cmcs-counter;
loss-priority low;
forwarding-class assured-forwarding;
accept;
}
}
term ran-rlp-retransmission {
from {
dscp af41;
}
then {
count rlp-retransmit-counter;
loss-priority high;
forwarding-class assured-forwarding;
accept;
}
}
term user-best-effort {
then {
count user-be-counter;
forwarding-class best-effort;
accept;
}
}
}
}
CoS for NAT Services on ACX Series Universal Access Routers
For packets that go through NAT services, the classification is done when the packet
enters the router, and the resulting forwarding class and the packet loss priority are
preserved when the packet goes through the inline services interface. When the packet
exits the router through a physical interface, the queuing, scheduling, and rewrite rules
887Copyright © 2017, Juniper Networks, Inc.
Chapter 27: Configuring Class of Service