term standby {
from condition standby;
then {
local-preference add 30;
community set l3vpn;
accept;
}
}
term default {
then {
community set l3vpn;
accept;
}
}
}
policy-statement l3vpn_import {
term 1 {
from community l3vpn;
then accept;
}
term default {
then reject;
}
}
policy-statement ospf_export {
term 0 {
from community l3vpn;
then accept;
}
}
community l3vpn members target:64511:600;
condition primary {
if-route-exists {
address-family {
ccc {
lt-1/2/0.600;
table mpls.0;
peer-unit 601;
}
}
}
}
condition standby {
if-route-exists {
address-family {
ccc {
lt-1/2/0.600;
table mpls.0;
standby;
peer-unit 601;
}
}
}
}
user@PE1# show routing-options
645Copyright © 2017, Juniper Networks, Inc.
Chapter 20: Configuring MPLS and Pseudowires
To Next Page
Loading...
