Juniper ACX2100 - Page 737

}
idle-standby-path-switchover-delay seconds;
import [ policy-names ];
interface interface-name {
family (inet | inet6) {
bfd-liveness-detection {
authentication {
algorithm algorithm-name;
key-chain key-chain-name;
loose-check;
}
detection-time {
threshold milliseconds;
}
minimum-interval milliseconds;
minimum-receive-interval milliseconds;
multiplier number;
no-adaptation;
transmit-interval {
minimum-interval milliseconds;
threshold milliseconds;
}
version (0 | 1 | automatic);
}
disable;
}
import;
hello-interval seconds;
mode ( sparse | sparse-dense);
neighbor-policy [ policy-names ];
override-interval milliseconds;
priority number;
propagation-delay milliseconds;
reset-tracking-bit;
version version;
}
join-prune-timeout;
nonstop-routing {
disable;
}
override-interval milliseconds;
propagation-delay milliseconds;
reset-tracking-bit;
rp {
auto-rp {
(discovery | mapping);
(mapping-agent-election | no-mapping-agent-election);
}
bootstrap {
family (inet | inet6) {
export [ policy-names ];
import [ policy-names ];
priority number;
}
}
bootstrap-export [ policy-names ];
679Copyright © 2017, Juniper Networks, Inc.
Chapter 22: Configuring Multicast Listener Discovery and Protocol-Independent Multicast