Juniper ACX7100 - Install the ACX7100-48 L Router

With 48 SFP and 6 QSFP56-DD ports, the ACX7100-48L routers enable a wide variety of conguraons that include
support for 10-Gbps, 25-Gbps, 40-Gbps, 50-Gbps, 100-Gbps, and 400-Gbps speeds.
We ship these routers with redundant power supplies. You can order ACX7100-48L routers with front-to-back airow
(AIR OUT or AFO) or back-to-front airow (AIR IN or AFI), and with AC or DC power supplies.
You can onboard and manage an ACX7100-48L router by using either the Junos OS Evolved CLI or Paragon
Automaon.
Install the ACX7100-48L
IN THIS SECTION
What's in the Box? | 2
What Else Do I Need? | 3
Install the ACX7100-48L in a Rack | 3
What's in the Box?
• ACX7100-48L router with six preinstalled fan modules and two preinstalled AC power supplies
• Two AC power cords appropriate for your geographical locaon
• A breakout cable to simultaneously connect to a console and to a me of day (TOD) device
• Two power cord retainers
• A four-post rack mounng kit that contains:
• Two mounng rails for mounng the router ush with the front posts of a rack
• Twelve at head Phillips screws for aaching the front mounng rails to the router
• Two rear mounng blades
2